Choose LED wash wall lamp, doubtless is considering that it is more energy-saving, environmental protection, no stroboscopic, but in the long-term use case, LED lamps and lanterns also have wear, plus some wrong operation, it is easy to damage the LED lamps and lanterns. Even LED lamps and lanterns, also need to have a good maintenance, can play a maximum efficacy and has a longer service life. With the popularity of LED lamps and lanterns, more and more consumers are beginning to pay attention to the use of LED lamps and lanterns and maintenance problems.

A, LED lamps and lanterns below what circumstance easily damaged?

1, poor quality of LED lamps and lanterns more often fails, so should look for when buying a quality assurance brand manufacturers to buy.

2, according to product instructions correct use of LED lamps and lanterns is prone to failure, exist hidden dangers.

3, when using, current is too large than the rated current of the LED lamps and lanterns, can cause the LED drive power supply part of components or the breakdown of danger.

4, LED wash wall lamps and lanterns "mist" problem, pointed the candle light, bulb lamp, project-light lamp, etc on the inner wall of the light after a period of time cover, the phenomenon of the water, water mist. LED lamps and lanterns of general assembly consists of several different materials, such as lamp cup heat part is metal, such as plastic, acrylic lampshade; Lamps and lanterns in the workplace will produce certain quantity of heat, thermal expansion coefficient of different material is different, after long-term use can produce cracks in the joint of different materials and the inlet; When used in the humidity larger environment, the chimney internal and external temperature is different, chimney internal heated gas chimney in the cold, if the gas contains more water vapor can produce water mist and the phenomenon of water droplets, continue to light after a period of time, this phenomenon will disappear. Damp environment, therefore, also the factors affecting the service life of LED lamps and lanterns.

Second, the LED use principles and maintenance methods:

1, buy back after the lamps and lanterns, don't busy installation, read the installation instructions carefully, then follow the installation instructions to install lamps and lanterns, incorrect installation, the possible danger.

2 don't change the structure of lamps and lanterns, in the cleaning maintenance, also don't change the parts of lamps and lanterns, after maintenance, should install lamps and lanterns is good according to the sample, don't packing, wrong parts of lamps and lanterns.

3, avoid frequent switch when use the lamps and lanterns, although the number of leds switch resistance is common fluorescent lamp of about 18 times, but still too frequently will influence electronic components inside the LED lamp life, thus affecting the service life of lamps and lanterns.

4, paying special attention to, in addition to the special LED lamps and lanterns, common LED lamps and lanterns should avoid to use in the damp environment. , damp environment can affect the LED driver power supply of electronic components, electronic components be affected with damp be affected with damp, shorten the life of lamps and lanterns. Therefore, moisture is one of the key points lighting maintenance, especially the bathroom, the leds of the bathroom and the kitchen stove headlights, all want to install the dampproof lampshades, in order to prevent moisture intrusion, avoid corrosion damage or leakage short circuit.

5, LED wash wall lamp had better not water cleaning, can wipe with dry dishcloth touchs water commonly, if accidentally run into water to dry, avoid by all means after turn on the light immediately with a damp cloth to wipe.