Your current location: 首页 > News
CATEGORY
CONTACT US

Zhongshan Lighting Technology Co., Ltd.

Contacts:Miss Chen

Mobile:18938729359

Tel:0760-22552969

Email: sunnylighting_dym@163.com

Add:four/F, inner complex Building, No. No. 228

News
Soft article lamp with light wash wall lamp bracket what to distinguish
Author:小编   Publish time:2023-03-02

Article  soft light, hard light, wash wall lamp, bracket what to distinguish?


1, low voltage soft light band

Above, we are one of the most common low-pressure lamp tape, use more has 12 v and 24 v. Low-voltage soft light belt use is very convenient: tear up the protection of the back glue paper, you can stick it in a relatively narrow, hope is the whole light, such as a bookcase, shelves and cupboards, and so on. Advantage is that can change shape, turn, arc.

Light to bring every one a little scissors logo, on behalf of this place can be cut. How long is usually cut again? Depends on the working voltage lamp tape. Bring, for example this op 24 v lights is a scissors and six bead generally every length is 10 cm. Like some 12 v, is a shearing three beads, about 5 cm.

In addition, you can see, some of the lamp with a plastic cover, and some not, but not obviously protective cover to prevent to get an electric shock (low voltage is relatively safe), just use a slightly different requirements, such as cloth lamp illuminates type, easy to dust fall dust, it is recommended to use more with shielding, convenient and clean.

Low-pressure lamp belt because substrate is thin, over-current ability is weak, so most is 5 m a. If you use a scenario requires lamp with a long, then there should be more than one connection, with a lot of transformers. In addition also has to do 20 m a, lamp tape substrate do thicker to increase the current capacity.


2, high pressure lamp

High pressure lamp tape, generally speaking is 1 m even a cut 2 m in shear, remember not to cut in the middle, and the entire group lights are not bright. Suppose that we only need 2.5 m light band, how to do? Cut 3 m, and then put extra half a metre to fold back, or encase with black tape to prevent light-leaking, avoid local too bright.

High pressure lamp with commonly used in what place?

First, since the whole lamp high voltage 220 v, if used in such as steps, guardrail this place can contact will be more dangerous. Suggest in the position is higher, so people scratching their places, such as ceiling lamp chamfer, pay attention to use high pressure lamp belt must have protective casing. Applications are more long distance, high pressure lamp tape can be 100 m in a row, each 1 m can cut it, a drive with 100 m no problem. Relatively high pressure lamp with power will be high, some 1 m can be 1000 lm, even to 1500 lm. But it is important to note that the high pressure lamp has a stroboscopic, so to choose the right driver.

3, RGC colored lights

Each bead there are three core, so every bead can be issued three colors, three bead electricity can mix different colors of light.

Four solder RGB and positive.

Only connect the positive and red, the light is red.

Connect the positive and the red, blue, light is purple.

In addition, still can adjust current and input control, mix a richer color.

Article 4, hard light

Article hard light and soft light with no difference in essence.

In shape, bring soft lights on a hard aluminum plate after they became hard article lamp. So that its shape more neat, there will be no good soft light with construction winding phenomenon. Article on opal acrylic, lamp light becomes uniform, not as visible as soft light with each lamp bead, so often hard article lamp used for linear decorative lighting.

5, wash wall lamp

Sometimes, we also can give light plus lens, let light can hit we want effect, so hard article lamp is also often used to do the wash wall light distribution, this is why it is called the LED wash wall lamp.

On each lamp bead, combined with the rib lens do light distribution.

Set the play is a narrow light distribution.

Sideways is wide light distribution.

6, support

It is equipped with into the thread ends, connecting head, can be strung together into a long line, of course, how long can specific string, need to consult to wash the wall lamp manufacturers. Some products can make both ends of a transparent acrylic, so after the lights almost no dark space. In use, can do instead of fluorescent lamp bracket, also can hang in smallpox as simple lighting, such as a garage, warehouse these places of lighting requirements is not high.


{include file="common/footer}